Rear-End Floor for 2008 Mercedes-Benz C 63 AMG®
No.
Part # / Description / Price
Price
10
Cross-Member, Rear Seat 
Mercedes-Benz
Mercedes-Benz Description: Under rear seat. Rear-end floor, front. Center. Below rear seat.
10
30
Maintenance Cap Mercedes-Benz
Mercedes-Benz Description: Maintenance access for fuel pump. Maintenance opening for fuel pump. For maintenance access cover.
$38.50
$38.50
40
Cover Mercedes-Benz
Mercedes-Benz Description: Maintenance opening for fuel pump. Without seal. Maintenance access for fuel pump.
$54.00
$54.00
50
$5.75
70
Hexagon Head Screw Mercedes-Benz
Mercedes-Benz Description: M5x10.5. At blower;temperature sensor ventilation. Bracket to fire wall. Heat shield mounting. Control unit. Screening plates. Main floor,front right. Return line to partition panel.
$0.70
$0.70
220
305
Water Drain Grommet Mercedes-Benz
Mercedes-Benz Description: To load compartment well. 25MM. Left trunk recess. 25MM.
$3.40
$3.40
340
Plastic Nut Mercedes-Benz
Mercedes-Benz Description: Cover to left main floor. Mount, wheel arch liner, left. Wheel arch liner to bodyshell, front axle, front left. Cover to left rear-end floor. Rear holder mount.
$1.10
$1.10
505
$48.50
505
$50.00
525
Hexagon Head Screw Mercedes-Benz
Mercedes-Benz Description: M12x1.5x47. Left trailer hitch. Left support. Reinforcement to longitudinal member lh and rh. Screw, reinforcement, longitudinal member, rear end.
$9.50
$9.50
610
Nut Mercedes-Benz
Mercedes-Benz Description: Spring strut to body. M8
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 17,9mm
Width across flats: 13mm. Suspension strut to body. Torsion bar on body.
Diameter: 8mm
Strength / hardness class: 8
Thread code letter: M
Thread pitch: 1,25mm
Outside diameter: 17,9mm
Width across flats: 13mm. Suspension strut to body. Torsion bar on body.
650
$2.80
680
Expansion Rivet Mercedes-Benz
Mercedes-Benz Description: Cover to vent grille
Diameter: 8mm. Trim mount
Diameter: 8mm. Rear covering
diameter: 8mm. Mounting, cover
diameter: 8mm. Center trim to lower trim, left and right
Diameter: 8mm. Left and right basic carrier to trim
Diameter: 8mm. To control unit holder
Diameter: 8mm. To lower cover
Diameter: 8mm. Holder, rear switching module
Diameter: 8mm. Cover on bumper
Diameter: 8mm.
Diameter: 8mm. Trim mount
Diameter: 8mm. Rear covering
diameter: 8mm. Mounting, cover
diameter: 8mm. Center trim to lower trim, left and right
Diameter: 8mm. Left and right basic carrier to trim
Diameter: 8mm. To control unit holder
Diameter: 8mm. To lower cover
Diameter: 8mm. Holder, rear switching module
Diameter: 8mm. Cover on bumper
Diameter: 8mm.
$1.40
$1.40
