Refrigerant Line Arrangement for 1985 Mercedes-Benz 190E
No.
Part # / Description / Price
Price
8
Seal 
Mercedes-Benz
Mercedes-Benz Notes: ORDER BY THE METER
Description: Condenser to radiator 590 mm. At condenser,bottom.
9
Clamp Mercedes-Benz
Mercedes-Benz Description: Condenser to stiffening and to front cross member. Condenser to front central stiffening and to support,bottom.
$5.25
$5.25
11
Intermediate Layer Mercedes-Benz
Mercedes-Benz Description: Condenser to stiffening and to front cross member. Condenser to front central stiffening and to support,bottom.
$2.20
$2.20
14
$1.70
29
Tapping Screw Mercedes-Benz
Mercedes-Benz Description: Front fender to wheelhouse bracket. 4.8x13. Partition panel to fire wall,wheelhouse,connection support,and console. 4.8x13. Mounting, cover. 4.8x13. To 140 470 04 47. 4.8x13. Control unit. 4.8x13. Cooling pipe to side member and to engine cross member. 4.8x13. Line to upper rear wall. 4.8x13. High pressure line to subframe. 4.8x13. Screening below gear lever. 4.8x13. Heat shield mounting. 4.8x13.
$2.00
$2.00
35
Sealing Ring Mercedes-Benz
Mercedes-Benz Description: Pressure switch to liquid tank used for additional blower. 9.0 x 1.8 mm. Pressure switch to liquid tank used for compressor. 9.0 x 1.8 mm. At liquid tank. 9.0 x 1.8 mm. Refrigerant reservoir valve. 9.0 X 1.8 MM. Sensor. 9.0 x 1.8 mm.
38
Switch Mercedes-Benz
Mercedes-Benz Description: At liquid tank. 16 bar. Additional blower. 16 bar. Thermostat to liquid tank. 16 bar.
$74.00
$74.00
53
Valve Element Mercedes-Benz
Mercedes-Benz Description: To 129 830 01 70. To 140 830 20 15. Compressor-to-condenser refrigerant line.
$11.00
$11.00
80
Hexalobular Screw Mercedes-Benz
Mercedes-Benz Description: Rear lid to hinge lever. Drive to rear pillar. Pipe line to shock absorber leg reinforcement. Strut to front cross member. Bracket to car floor. Cooling pipe to front cross member. Engine hood upper catch to engine hood. Partition panel. Strut to stiffening,front central.
83
Nut Mercedes-Benz
Mercedes-Benz Description: Pipe line to shock absorber leg reinforcement. Pipe line to valve. Hinge lever to engine hood.
119
Line Mercedes-Benz
Mercedes-Benz Notes: FIRST EXHAUST STOCK OF OLD PARTS UP TO IDENT NO. F 967814
Description: From condenser to liquid tank.
122
Sealing Ring Mercedes-Benz
Mercedes-Benz Description: Heater. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. HEATING. 7.5X2.0Strength / hardness class: EPDMInside diameter: 7,5mmOutside diameter: 11,5mmMaterial thickness: 2mm. MOUNTING PLATE TO DRI ...
$3.80
$3.80
197
Bolt And Washer Assembly Mercedes-Benz
Mercedes-Benz Description: To 140 470 01 47. Bracket to auxiliary blower m 5x12. Bracket to whelhouse flange. Additional blower to condenser.