Apparatus Case and Control Units for 1984 Mercedes-Benz 500SEC
No.
Part # / Description / Price
Price
23
Screw 
Mercedes-Benz
Mercedes-Benz Description: Cover to apparatus case. M5X25
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Mounting, tank. Grab handle to roof rear rail,inside. Roller blind mounting. Bracket mounting.
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Mounting, tank. Grab handle to roof rear rail,inside. Roller blind mounting. Bracket mounting.
38
Screw Mercedes-Benz
Mercedes-Benz Description: Fastening electric motor. M5X30
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Engine fixing. Cable tray to apparatus case. Turn signal lamp to fender. Door separation point, rear.
Diameter: 5mm
Strength / hardness class: 8.8
Thread code letter: M
Thread pitch: 1mm. Engine fixing. Cable tray to apparatus case. Turn signal lamp to fender. Door separation point, rear.
$6.50
$6.50
40
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: Amplifier at c-pillar. Amplifier to bracket. Reinforcem. At bracket, left.
$3.50
$3.50
53
Hexagon Head Bolt Mercedes-Benz
Mercedes-Benz Description: Main muffler suspension. M8x16. Central muffler suspension. Bracket on rear axle m 8x16.
$3.30
$3.30
57
$3.50
59
Cap Screw Mercedes-Benz
Mercedes-Benz Description: Lower steering shaft to upper steering shaft. M8X35
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To separation point. Torsion bar to bracket. Bracket to caliper. Bracket to oil filter.
Diameter: 8mm
Strength / hardness class: 10.9
Thread code letter: M
Thread pitch: 1mm. To separation point. Torsion bar to bracket. Bracket to caliper. Bracket to oil filter.
$4.10
$4.10
74
77
Control Unit Mercedes-Benz
Mercedes-Benz Notes: NO LONGER AVAILABLE
Description: Only used with acceleration skid control (asr).
$264.00
$264.00
77
Control Unit Mercedes-Benz
Mercedes-Benz Notes: AS OF IDENT. NO., INTEGRATED IN CONTROL UNIT, ETS/ASR TRACTION SYSTEM
80
Remanufactured Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
WHEN ORDERING, PLEASE DO NOT FAIL TO FILL OUT THE FORM COMPLETELY, AND TO PUT IT ON FILE. "ORDER FOR SPARE KEYS/LOCKING PARTS" IN CASE OF CRIMINAL INVESTIGATIONS, YOU SHOULD AT ANY TIME BE ABLE TO GIVE DOCUMENTARY EVIDENCE.
SEE FOOTNOTES : 525 / 622
NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART.
STATE IDENT NO. WHEN ORDERING
WHEN ORDERING, PLEASE DO NOT FAIL TO FILL OUT THE FORM COMPLETELY, AND TO PUT IT ON FILE. "ORDER FOR SPARE KEYS/LOCKING PARTS" IN CASE OF CRIMINAL INVESTIGATIONS, YOU SHOULD AT ANY TIME BE ABLE TO GIVE DOCUMENTARY EVIDENCE.
SEE FOOTNOTES : 525 / 622
NOTE COND. RETURN VIA SYREK SETTLEMENT IN GERMANY. PLEASE ALSO ORDER AS REPLACEMENT PART.
STATE IDENT NO. WHEN ORDERING
80
Remanufactured Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
111
Shift Mechanism Egs Mercedes-Benz
Mercedes-Benz Notes: IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IF 017 545 04 32 REMOVED ORDER NEW PART BY STATING ES1 26 AND ID NO.
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IF 017 545 04 32 REMOVED ORDER NEW PART BY STATING ES1 26 AND ID NO.
Description: Es1 26.
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
111
Control Unit 1 Mercedes-Benz
Mercedes-Benz Notes: PART IS ONLY OR ALSO SUPPLIED AS RECONDITIONED PART
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
IMPORTANT:FOLLOWING INSTALLATION,CONTROL UNIT MUST BE PROGRAMMED USING HAND-HELD TESTER!
VERSION CODE CAN BE COMPARED TO DATA IN FDOK SYSTEM (FADON). IF A VERSION CODE IS NOT IDENTIFIABLE,IMMEDIATELY ORDER A NEW PART BY STATING ES1 26 AND IDENT NO.
1 This price excludes a refundable manufacturer's core charge. Add the part to your cart to see the core charge.